N64 RGB Amp Wiki

Started by simonbelmont2, August 19, 2010, 05:57:19 PM

Previous topic - Next topic

simonbelmont2

Sorry to say this but I think this picture http://www.gamesx.com/wiki/lib/exe/fetch.php?media=av:njmamp3.jpg is placed wrong in that section. If you look very close at the other pictures you will see that the PCB don't have the IC socket.
Someone to correct me if I am wrong.

kendrick

What's the page that's referencing that image? It's worth mentioning that quite commonly ICs will be mounted to a perf board like that without a socket or other dedicated connector. I do it all the time with 555 timers, especially since I don't have to have every pin connected to something.

RGB32E

The OP is right... I'll change it later... send me a PM...

Good eye! ;)

simonbelmont2

#3
This is the link with the picture in cause: http://www.gamesx.com/wiki/doku.php?id=av:n64rgb-amp.  By the way, I saw now, the PCB have different components.

RGB32E

Quote from: simonbelmont2 on August 20, 2010, 05:17:49 PM
This is the link with the picture in cause: http://www.gamesx.com/wiki/doku.php?id=av:n64rgb-amp.  By the way, I saw now, the PCB have different components.

The pic is a prototype for my next NES RGB amp...  :-X