News:

Forum Updated! 

Main Menu

hu card eprom question

Started by emerald danjon, July 17, 2011, 09:18:51 AM

Previous topic - Next topic

emerald danjon

Hi all!,I would like to make my own HU CARDS,as I do with  Mega Drive cartridges,with Megadrive is really easy task just burn with the eprom programmer taking into account  is needed the byte swap...,but with PCE when i burn the rom into a eprom this eprom content  is not recognizable  even in an emulator...  ???,if any know what im doing wrong...thanks in advance.

NFG

I had no trouble burning EPROMs.  If you can't burn content to the chip nor make that same content work in an emu (!?) you're definitely missing a simple step. 

emerald danjon

yeah!im doing something wrong,must have a different step from how to do it in Megadrive and PC Engine,when I open a ROM PCE with eprom programmer...and i save...just for try...i choose ROM and save as ALL FILES and i call for example DARIUS.PCE,and not work...,but when i do this with master system rom or megadrive rom works... ???,thanks for the patience  :D.

NFG

When I was burning the ROMs on my PCE proto board, I just:

Selected the appropriate device (I've used both flash and EPROMs)
Loaded .pce file into the burner software
Pressed the GO button.

It just works, it's not tricky.

emerald danjon

Quote from: Lawrence on July 18, 2011, 08:37:37 AM
When I was burning the ROMs on my PCE proto board, I just:

Selected the appropriate device (I've used both flash and EPROMs)
Loaded .pce file into the burner software
Pressed the GO button.

It just works, it's not tricky.
i have no ideas...,the most strange for me is i have no problem with other consoles...,really thanks Lawrence.