Using the TS-6BS1 mkIII

[famiac]

Got this interesting board. Seems like RAM+SCSI port

I believe this website says the pinout is unknown
http://soda-elec.jp/x68k/connect/scsi_connect.html

It looks like the connector on the x68k compact, but i tried to boot from hdd and i couldn't get anything.
It freezes up if i try to boot with my hdd connected.
If i try to connect my drive after booting and run susie.x, the program doesn't find anything.
My drive id is currently set to 3 (scsi2sd). I get no change in behavior if i set it to ID 0 (or so i think)

This thread has info about DIP switches

http://bubble3.2ch.net/test/read.cgi/i4004/1114339360/

Here are some photos of the board:





full size:
http://i.imgur.com/MsCv4iX.jpg
http://i.imgur.com/oWZGs7W.jpg

I tried db.x as shown in this thread but i'm not sure i'm doing it right
http://nfggames.com/forum2/index.php?topic=5422.15


Anybody got any idea of how to get scsi working?