X68000 to VGA

[emerald danjon]

Hi all,
im turning crazy,please someone can tell me if i'm soldering the Wires in the right way?,i look the schematics and i can't get a clear idea about,
i think i soldering the wires in the wrong way.
in alL schematics i find are not indicated like
" SOLDER SIDE"
just i need to know if the RED is the first from the Left?,pin 1 is the first on the left?


Huge thanks in advance.
Greetings.

[eidis]

 Hi Gillianx68000 !

Please look at the attached picture, it should answer your question.

Keep the scene alive !
Eidis

[eidis]

Thanks Eidis,
i think i will try extend the Wire...,
first i need built the video cable,for test the computer AGAIN,
a lot of time without use,and i cant find my RGB to VGA cable,
the Computer must show image without FDD,s?
i cant get image and im really afraid because i think im doing properly the cable...,
huge thanks
KEEP THE SCENE ALIVE!

Hi Gillianx68000 !

You soldered the wires backwards. For example, RED wire is soldered to pin 8 and not 1 as it should be. The X68000 should and must display insert floppy prompt when powered on and if there is no hard drive.

in alL schematics i find are not indicated like
" SOLDER SIDE"

The pins are usually numbered at the connector. Please magnify the picture in my previous post and you will see the pin numbers.

Keep the scene alive !
Eidis

[caius]

http://www.gamesx.com/wiki/doku.php?id=av:japanese_rgb-15

[emerald danjon]

Hello,thanks Guys,
Eidis in this case the numbers are really hard to see and my Cam dont catch...,but the PIN 1 is the Pin where i solder the GND BLACK WHIRE...in my photo...
Hello,thanks Guys,
EDIT:
i need to say i follow the Schematics,just i dont know the pin to start:

-------------------------------------------1-RED
----------------------------------------- 2-GND
------------------------------------------3-GREEN
------------------------------------------ 4-GND
------------------------------------------ 5-BLUE
------------------------------------------ 6-GND
-------------------------------------------7-NO CONECT
-------------------------------------------8-GND
...............etc etc

[eidis]

 Hi Gillianx68000 !

i need to say i follow the Schematics,just i dont know the pin to start:

Pin1 is at top left side, when looking at the connector from the front (the side which plugs into socket). Please look again at the picture which I attached in one of the previous posts. You will see that unused pins are not connected.

Keep the scene alive !
Eidis

[emerald danjon]

jejejejej i'm starting to be worried,cause i see i'm doing well...and no picture...,

[emerald danjon]

Oh ! Works! 
done.
Huge Thanks Guys!,
tomorrow i can go for fix the FDD...,refurbished and if dont work try to attach the FDD from the CB600,
Greetings.

[eidis]

 Hi Gillianx68000 !

Keep up the good work ! See you in the floppy thread

Keep the scene alive !
Eidis

[emerald danjon]

Yeah i'm right now on the work,and i have happy questions ,
huge thanks guys.