Started by albino_vulpix, November 21, 2008, 07:23:44 PM
Quote from: Shadow_Zero on March 24, 2014, 07:34:42 PMSo what components do you have in your Consolegoods PAL N64 s-video cable?
Quote from: PluueeR on March 25, 2014, 08:03:07 AMFor testing, I made a video only cable. The spare MultiAV cable I had (composite), only had a couple pins inside. So I still need a decent one, with more pins for the audio. I connected it as follows: from N64 to scart:pin 5 - grnd - pin 17pin 7 - luminance - pin 20pin 8 - chrominance - pin 15I'm surprised that I didn't need to install any resistors or capacitors. The picture looks pretty decent. Not as good as my SNES with RGB, but I intent to think this is better than composite, with less dot crawl. The menu of Mario 64 is a very good test for this. Now, I need to source a MultiAV plug with enough pins to complete this cable.
Quote from: mashley on March 27, 2014, 01:40:50 AMMakes me wonder whether there's a grounding issue here. I might try unsoldering the audio connectors from one of my s-video cables and see if that makes any difference.
Quote from: mashley on March 27, 2014, 10:08:34 PMS-video looks terrible on the SNES, and mediocre on the N64.
Quote from: ApolloBoy on March 28, 2014, 07:46:24 AMQuote from: mashley on March 27, 2014, 10:08:34 PMS-video looks terrible on the SNES, and mediocre on the N64.Well if you're using a shit S-video to HDMI converter then no wonder.