Dol 101 - Gamecube Rgb Mod?

[Souzar]

Hello,

What with nintendo taking out the digital-AV out from the newer gamecubes, is there any way of getting at least RGB from the console instead of just the composite output? I am thinking if there is a mod (similar to what was done with the N64) that would get RGB direct from where it was needed and forward it to pins 1,2 and 3 of the snes style av port?

there is a chip that looks like it may be responsible (judging by the tracks leading from the flipper chip to this chip and its location to the av port)

AVE N -DOL  A
RS5C582C
4JS 87P

and its a 32pin dil? (16 pins on either side) type.

Well I hope someone can come up with a RGB mod for this model of gamecube, I cant handle composite for much longer! especially as I know what it is really capable of!

[NFG]

Call Nintendo and arrange for it to be sent to them.  They'll apparently replace the internals with a proper digital-ready motherboard.

[Souzar]

Call Nintendo and arrange for it to be sent to them.  They'll apparently replace the internals with a proper digital-ready motherboard.

Wheres the fun in that?

I have this problem because I live in the UK, would Nintendo of America still do the exchange?

[NFG]

If you have a PAL system it already outputs RGB.  Personally I'd suggest getting a different 'cube rather than mucking about inside.  That said, I don't have the info you want.  =(

[Souzar]

If you have a PAL system it already outputs RGB.  Personally I'd suggest getting a different 'cube rather than mucking about inside.  That said, I don't have the info you want.  =(

Its not a problem, I have an NTSC DOL-101 that I bought recently, its a NTSC console from the US. I usually use my panasonic Q, but I bought a second GC for mucking around/modding etc and it was the only model available brand new.