cz-6be4c 4MB memory expansion is compatible with XVI Compact?

[hyrulebr]

Hi Guys

I've just sold an unused Cz-6be2c/cz-6be4c Sharp 4MB board and the buyer have a XVI compact. I will send to him monday but the problem is that I only tested it with a Super model and according to this table on the X68000 faq only model CZ-6BE4D are listed as compatible (4MB):

https://gamesx.com/wiki/doku.php?id=x68000:x68000_faq

I didn't find a picture of CZ-6BE4D. Maybe it's a board for use in the exclusive XVI compact memory slot.

What you think? Cz-6be2c/cz-6be4c will not work on XVI compact or will not work in 16mhz mode?
   
Also have a KGB-PRK II board that I could offer to the buyer. But I think will be the same...

https://gamesx.com/wiki/doku.php?id=x68000:kgb-prkii_-_fpu_memory_board

Thanks

[repoMan]

Can't speak about this precise model; but I've used in my compact (and X68030) the RAM expansion PIO-6834-2/4M-1 that it's not listed in the FAQ as compatible without problems, it fits in the slot and works fine.

[kamiboy]

So far as I know the only model specific ram expansion modules for X68000 machines are the internal type that go into a tiny slot on the motherboard. The OG, ACE and XVI models have these. The other type, which just slot into the expansion board slots should be universal.

[hyrulebr]

Thanks for the replies! 

I tested with a XVI Tower and indeed the board works with 16mhz. 

[llioncourt]

The buyer is very happy with his new 6MB X68K now. Thanks!

[hyrulebr]

The buyer is very happy with his new 6MB X68K now. Thanks!

It´s a small world afterall!