News:

FORUM UPDATE:  The email problem has been fixed, and emails should now be sent out immediately instead of queuing for days.

Main Menu

X68000 ACE cap list with pics

Started by hoshikawa, February 02, 2018, 09:50:12 PM

Previous topic - Next topic

hoshikawa

I spent the afternoon compiling a list of caps for the ACE with accompanied pics and uploaded it to the NFG Archive, I couldn't be arsed to take apart my desktop again so I sourced the pics from here or there, I take no credit :P

https://nfggames.com/X68000/Uploads/x68000%20ACE%20cap%20list%20with%20pics.zip

Nicky Biscuit


cawley1

Has someone done a cap list for the XVI (normal, not compact)?

MrKsoft

Quote from: cawley1 on February 16, 2018, 05:47:54 AM
Has someone done a cap list for the XVI (normal, not compact)?

I have done a partial list for the XVI based on the uncapped components for my unit that's acting up.  Did not make a list for the PSU as mine was received with the PSU already done.

Main board:

C10: 0.47uF 50v
C16: 470uF 10v
C17: 2200uF 6.3v
C25: 220uF 6.3v

Expansion riser:

C802: 47uF 10v
C804: 47uF 16v

Bottom board:

C201: 4.7uF 50v
C202: 4.7uF 50v
C203: 4.7uF 50v
C204: 4.7uF 50v
C207: 4.7uF 50v
C208: 47uF 16v
C209: 100uF 16v
C210: 100uF 6.3v
C211: 100uF 16v
C212: 100uF 6.3v
C217: 22uF 16v
C218: 1uF 50v
C224: 100uF 6.3v
C225: 10uF 16v
C226: 4.7uF 50v
C227: 100uF 16v
C230: 4.7uF 50v
C231: 0.47uF 50v
C232: 0.47uF 50v
C233: 1uF 50v
C234: 100uF 10v
C235: 100uF 16v
C236: 0.47uF 50v
C237: 100uF 6.3v
C238: 100uF 6.3v
C242: 100uF 16v
C243: 100uF 10v
C247: 0.47uF 50v
C249: 100uF 6.3v
C252: 47uF 16v
C253: 47uF 16v
C258: 1uF 50v
C259: 100uF 16v
C260: 4.7uF 50v
C261: 100uF 10v
C264: 0.47uF 50v


== TOTALS ==

0.47uF 50v 6
4.7uF 50v 8
47uF 10v 1
47uF 16v 4
470uF 10v 1

22uF 16v 1
220uF 6.3v 1
2200uF 6.3v 1

1uF 50v 3
10uF 16v 1
100uF 16v 6
100uF 6.3v 6
100uF 10v 3

Total Caps 42



vanpeebles

This was the list I made for the normal XVI (not compact)Mobo, RGB module and I/O board.

cawley1

Thanks guys!

Mine had the PSU replaced by BEEP in Japan, so I only need PCB's and drives...