nfg.forums

well i need some basic help. as suggested on some of the other posts, i decided to look around on google, and gamesx.com before asking questions.

well to start off, i want to take the rgb signal from my Sega Genesis CDX and display it to my monitor.

to start off i checked out
http://www.gamesx.com/avpinouts/genesisav.htm

this told me about the a/v output. the CDX uses the same as the genesis2 model.
but from this part i did not know what to do with it. so i went to google

from there i found this rahter useful site
http://www.billnkaz.demon.co.uk/segalist.htm

this shows how to set up the genesis up to the monitor. this was useful, except for 2 things.

this 1st being that it was only for the genesis 1 model, but from the a/v pinout diagram at gamesx.com.... its not a problem to adapt the diagram.

the  other problem is the monitor hook up. it show a montor with a 9 pin input. the monitor i have(a Daewoo CMC 1502b1) has a 15 pin input. so i am here. i need help on where to put the wires into the monitor. i havent started yet, in case some of the info is incorrect, and look to you for help.

please help.

This was recently answered on this thread.

Don't automatically assume hes talking vga. My applecolor RGB monitor uses a db-15 also. I guess the question to ask is, what monitor do you have?

Correct, that is the question--but he already knows the answer.

Quotethe monitor i have(a Daewoo CMC 1502b1)

We don't know the pinout of that monitor. You'll need to contact Daewoo, look through their website, or if all else fails locate a manual for your monitor. It should have this information in it.