nfg.forums

Hello @famiac , would you sharing where did you find the ball bearing that you used?

Hey folks,

Just to confirm, the cable I order from Aliexpress is working without issues!
Video & Sound

I am using the X68000 emulator XM6 TypeG v3.31 L15.
Is there a command line program that I could run inside the emulator to cause a shut down of the OS and exit the emulator?
My goal is to use the emulator in a sort of "batch mode": start the emulator with a command line, then the OS boots and automatically performs some tasks that produce output files, then  the emulator would automatically exit and the processing of output files would continue on the host Windows OS, all without any user interaction.
I'm looking for something similar to UAEQuit that is supplied with the WinUAE Amiga emulator for those who know it.

Nice, it's free?

hi recently got a PC9821Ce2 now i finished recapping it, but need to know how to write the image to a disk ?.

using an ide to sd card adapter tried raw writing the file to the sd card using balenaetcher but the pc98 will not boot it get stuck after the ram test.

It seems that V and H-Sync are broken on my CX20. I accidentally used an X68k to Scart cable with H and V-Sync connected together. Now there is only one image when I use pin 7 c-sync.
Strangely, my OSSC shows the correct Sync Hz and Khz values on the display. But no picture, 2 Extron devices show "no signal" and the LED on the SLG3000 stays off even when there is a connection.
So it seems to be V-Sync, possibly H-Sync too.

Are there any schematics out there to see what's in the wires?

Yes, still available. Sent you a message.

Hey, do you still have them? If so, I live in Dresden, Germany, my postal code is 01189.

Quote from: bobrocks95 on May 09, 2024, 03:22:37 PMThose look nice!  Simple but that's all you need.  What multicore wire did you use, and is that strain relief or just shrink tubing on the box side?

I see your looking at porting the code, nice.
Inside there are just 2 bits of matchsticks to stop the board from moving backwards. You need some clearance to get the board in. I might have made it tighter but then I was worried that I would not be able to extract the board from the case.
Yeah just headshrink. I cant seem to add photos when replying using phone browser.
Cable is just 6? core. I had lying about, sorry I don't have a part number for that.
I used heatshrink to give the cable coming out the hole in the case a good grip. The hole can be cut/filled if you use bigger wire, the lid also helps grip it into position.

I'm not sure which video you're talking about, but a few things to check:
First, which set are you using, I used "MAC_SET".
Do you have the correct boot ROM? It needs to be a Japanese Macintosh Plus ROM. Mine has SHA-1 73bf2eb215646e108daa0cdd874e6c843c8ce421.
Not sure which startup file you're editing, I didn't have to do that.