"RGB Shifter" (in order to adjust RGB to left/right)

[kwyjibo]

Hi,

Is there any circuit I can do to adjust the console output horizontally?

[Moosmann]

I already sold all my RGB Shifter last year.
I don`t make the circuit available for public at the moment, but I still can offer complete and tested PCBs with all Parts.

Greetings Markus

[kwyjibo]

Hi,

Thank you for your response, I'm very interested. Does it have any impact in picture quality? Where does it plug? Maybe to the SCART port?

[Drewman21]

I would be interested in one too. What would be a price to the USA zip 58103?  Thanks!

[viletim]

I had a go at this....

How's it compare to your one Markus?

I can't attach the image to the post for some reason...

An Error Has Occurred!
Cannot access attachments upload path!

Lawrence, don't tell me this forum doesn't allow PNG files too.

http://members.optusnet.com.au/eviltim/shiftysync/shiftysync.png

[NFG]

Of course it allows, PNGs, I love PNGs!

The error would suggest the attachment path is invalid...

And it's fixed!  Thanks viletim.

[Moosmann]

@viletim: I have 2 difference circuits, but all 2 are difference compare with your shifter. You also need an oscilloscope to pre-adjust my shifter.

I make an update on my homepage within the next 2 Months with the diagram, but I still need ther permission from the other "owner" from austria.

Greetings Markus

[kwyjibo]

Hi there,

Moosmann, if I don't have an oscilloscope to calibrate it, would it work?

[Moosmann]

An oscilloscope is required in order to get a stable outputsignal. But you need this only the first time before you use. This is one of the reasons why I never make this circuit public, because my shifter isn`t a good circuit for everyone homemade reproduction.

You don`t need an oscilloscope for already soldered circuits naturally.

Greetings Markus

[kwyjibo]

And what about analog delay lines?