Direct RGB from Famicom Titler

Started by Moosmann, August 01, 2005, 05:02:29 AM

Previous topic - Next topic


2 Year old photo :)
Direct RGB from Titler. You still need a 75-Ohm resistor for everyone red, gree, blues RGB Signal.

You can also take the S-Video Y (Luminance) for Sync.

Bye Markus


It's a real shame the titlers have gone up 4x in value in the last three years, eh?  =(

Good image, thanks for the info!


Thanks for the info.  I just got a Titler today, so I'll try the RGB modification right away.

Any things I should watch out for?


Watch out for the ugly RGB palette ;P