cxa1145 application note cavo2

[socialdrone]

i noticed the .pdf file for the cxa1145 was missing some information.  i dont know if its worth mentioning but its missing the application notes that show how to get Y,C output for s-vhs.  it requires a second cxa1145 chip, a delay line, band pass filter, two variable resistors, ect.

anyone interested in this?

[NFG]

I don't have the info you're looking for (Use a CXA1645 instead, it has real svideo) but I can tell you it's not s-vhs (that's a video tape), it's s-video.  

[viletim!]

If it's by sony then yeah, I'd like to see it. It's in japanese isn't it?

[socialdrone]

my above post could have been written better, sorry about the confusion.

its by sony and its in english.  i would have scanned it into my computer and posted it, but i dont have a scanner.  so i thought id ask if it was something people might be interested in...before i went to the trouble.

as far as whats written, there isnt much so ill just write it out.  


Application Note CAVO2
NTSC/PAL Encoder Y,C Interface

RGB encoder - CXA1145P/M can provide Y, C output.  The following is the circuit diagram to apply this output.  S-VHS requires 75ohm drive capability for Y, C output.  Output level should be adjusted with 1k ohm potentiometers.  Recommended parts are the following, and available from TOKO America  (Telephone: 708/297-0070)



3.58MHz Band Pass Filter        H286BAIS-6276DCD
4.43MHz Band Pass Filter        H286BAIS-4963DCD
Delay Line                             H288LSMS-3245PKD