Strange LHES issue, pls help.

[Retro-Rabbit]

I'm getting an error loading LHES from my SCSI2SD, and it's an odd one as nothing has changed outside of not booting the X68k for about a month.

The error states 'can not secure data area' and won't boot into LHES.
However, if I boot from a master-disk it will mount the SCSI2SD as drive c: and I can load LHES from the prompt but because it's mounted as c: it won't boot any multi-disk programs.

I've tried using the SCSI2SD on the sasi bus, as well as externally through my sacom scsi board with the same error.

I've re-written the drive image a few dozen times and double checked all the setting on the SCSI2SD board (v5.2) with out success.

The image boots perfectly fine in my X68 emulator as a sasi drive.

I know it's not a read only issue as I've been able to copy the master-disk files over without any problems.

Thoughts?

Thanks in advance.