PCE Duo RX RGB mod advice

[hellbelly]

I've been asked to make an RGB scart lead with an amplifier for someones Duo rx.  This guy is in a different country to me, so I would like to avoid any trial and error, plus - I've never even seen a PCE before, let alone taken one apart to play around.

I've squeezed the N64 amplifier into a scart plug before - am I right in assuming that the N64 amplifier, which I've seen around here somewhere, isn't brilliant when used with a PCE?

I've been looking at building the amplifer as shown on the RGB mod page on gamesx, I see it needs 12V aswell as the normal 5V.  I have a couple of questions about it:

Which scart pins do the 5V and 12V signal goto?  I assuming 8 and 16?

Will it be easy for the other person wiring up the socket in the Duo to find a 12V source?

Apologies for the simple questions!

Cheers
Pete

[Anderson 21]

i make pce booster cables. goes between the scart plug and tv. works a treat.
I live in uk so let me know if you want one.

[hellbelly]

hmmm... if you pass me on your email address, i'll pass it onto the guy i know who needs one.

cheers
pete

[fragment]

Lawrence, could you post up another diagram for clarification on the amplifier for the RGB TurboDuo

[NFG]