superfamicom repair help

[inspecteurZ]

Hello. I have a jap snes. It worked fine at start, but now its output signal is too bright. I use RGB cable. Someone told me it's my fault for use a pal snes adapter. I was told to use genesis instead. Aside the adapter problem, there are any fix for the output problem?

Thanks .

[inspecteurZ]

any idea?

[viletim!]

I was told to use genesis instead

The RGB cables for NTSC and PAL snes consoles are differnet. Have a look at this page. If contrast is too high (and is saturating) then try putting a resistor (of, say, 47 ohms) in series with each colour signal to attenuate it.

[inspecteurZ]

thanks! I'll try it