Hello everyone!
I need help to connect my xbox (first model) to a 15 kHz arcade monitor.
In reference to this link: http://www.gamesx.com/avpinouts/xbox.htm (http://www.gamesx.com/avpinouts/xbox.htm), I just have to connect pins 17, 18 and 19 to 8 pin?
Thanks for your help and sorry for the question perhaps trivial, but I am new in this field.
Greetings.
That's correct, if you connect 17-19 to 8 it will enable 15kHz RGB.
Great, thanks for the answer.
So if I want to connect to the monitor with the pins as shown in the attached image I should plug everything in this way:
MON pin -> XBOX pin
B -> 9
G -> 11
R -> 22
GND -> 8
V -> 4
H/C -> 16
Is that correct?
I'm not going to verify you chose the right numbers, but you've got the right signals. But in 15kHz RGB mode you only get C-sync, not H/V sync.
So there is the possibility that not work?
If your monitor relies on H&V sync, it won't work. I don't think I've ever seen an arcade monitor that relied on H&V, so you're probably fine. Time to wire it up and find out. =)
OK, then I try to connect as shown in the diagram and see what happens ;)
Thanks again.