nfg.forums

NFG Forums => Console Mods => Topic started by: emerald danjon on June 26, 2014, 11:05:12 PM

Title: Vectrex hack PAD
Post by: emerald danjon on June 26, 2014, 11:05:12 PM
Hi all!
i need help for understand how hack the original Pad from Vectrex for build an Arcade stick...,

the buttons are done...and works

,that is the easy part...,but i have great difficulty for understand the analog Axis...,

i have the resistors etc but i cant find the way,someone can explain me from the 6 wires who are soldered on the AXIS who is what is needed solder to the Arcade directions?

maybe i not doing the correct questions...im little lost with this,

thanks in advance,

have a nice day guys.
(http://i263.photobucket.com/albums/ii143/romantica289/vectpad_zps72548c5d.jpg~original)

and here the schematics  i don't understand

(http://i263.photobucket.com/albums/ii143/romantica289/vectrex_layout_zpsc538312d.gif~original)

(http://i263.photobucket.com/albums/ii143/romantica289/vecstick_zps4df4706d.png~original)
Title: Re: Vectrex hack PAD
Post by: emerald danjon on June 27, 2014, 07:14:57 AM
Done,

my mistake was not connect every microruptor GND to 3,3 resistor...,
now all works great!,
:)

Greetings.