Print Page - Direct RGB from Famicom Titler

Title: Direct RGB from Famicom Titler
Post by: Moosmann on August 01, 2005, 05:02:29 AM

2 Year old photo :)
Direct RGB from Titler. You still need a 75-Ohm resistor for everyone red, gree, blues RGB Signal.

(http://i16.photobucket.com/albums/b14/moosmann/electronic/Titler-RGB.jpg)

You can also take the S-Video Y (Luminance) for Sync.

Bye Markus

Title: Direct RGB from Famicom Titler
Post by: NFG on August 01, 2005, 07:50:48 AM

It's a real shame the titlers have gone up 4x in value in the last three years, eh? =(

Good image, thanks for the info!

Title: Direct RGB from Famicom Titler
Post by: ccovell on August 04, 2005, 11:44:47 PM

Thanks for the info. I just got a Titler today, so I'll try the RGB modification right away.

Any things I should watch out for?

Title: Direct RGB from Famicom Titler
Post by: kyuusaku on August 05, 2005, 12:46:13 PM

Watch out for the ugly RGB palette ;P

nfg.forums

NFG Forums => RGB + Video Discussions => Topic started by: Moosmann on August 01, 2005, 05:02:29 AM