Print Page - U.S.A SNES UNIT

Title: U.S.A SNES UNIT
Post by: wizards_sleeve on August 12, 2004, 02:09:16 AM

Hi i have been given an U.S.A unit (no P.S.U) or converter !
i have tried Maplins uxbridge:angry: & told no mate can't help you with that also tried game / gamestation & got the same answer - looked on Ebay - no luck.

Will some one please help me out - i've got 6 USA games the snes & no way to power the unit - please tell me were to get these in the uk

Thanks :mellow:

Title: U.S.A SNES UNIT
Post by: Martin on August 12, 2004, 06:01:40 AM

Use a UK PSU then :rolleyes:

Title: U.S.A SNES UNIT
Post by: benzaldehyde on August 12, 2004, 10:32:39 AM

Input: 120V 60Hz 17W

Output: DC10V 850mA (Center Negative)

Try and match these specs, or try the American eBay site. They have plenty. Cheers! :)

Title: U.S.A SNES UNIT
Post by: NFG on August 12, 2004, 11:08:36 AM

You certainly don't need to match the input specs. =D

Title: U.S.A SNES UNIT
Post by: MDX on August 19, 2004, 12:49:47 PM

Right all you need is a generic multivoltage PSU 9V at around 1Amp (no less then 800ma but anything under 1.5A is okay).

Maplins also sell a compatable plug for a USA SNES (the funny big round connector with a tiny pin in the centre). Take the machine with you and they should be able to help you if you ask nicely...

The plug will just connect to the multivoltage PSU (maplins do at least 2) just make sure you connect it as negative polarity...

Title: U.S.A SNES UNIT
Post by: Schweino on August 19, 2004, 06:39:40 PM

QuoteUse a UK PSU then :rolleyes:

Wont fit... Different plug.

nfg.forums

NFG Forums => Info Requests => Topic started by: wizards_sleeve on August 12, 2004, 02:09:16 AM