nfg.forums

NFG Forums => SIG X68000 => Topic started by: vanpeebles on November 08, 2017, 08:44:27 PM

Title: x68000 newbie saying hello! :)
Post by: vanpeebles on November 08, 2017, 08:44:27 PM
Hello there, hopefully in the next few days, I'll have my hands on an x68000 for the first time.

This board has already proved an excellent source of reading and information, so I thought I'd better join, and say hello! :)
Title: Re: x68000 newbie saying hello! :)
Post by: X-Col on November 08, 2017, 11:27:04 PM
Hi vanpeebles,

welcome to this great community!!

Enjoy your X68000, what model is it?

Not that it matters, they're all great...

X-Col
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 08, 2017, 11:47:41 PM
Cheers! It's a Pro II desktop in black :)
Title: Re: x68000 newbie saying hello! :)
Post by: repoMan on November 10, 2017, 12:25:21 AM
Welcome aboard!

Cool machine!, If you have found also a matching keyboard and Sharp monitor is a great looking setup :)

Btw, does it have a Xellent accelerator inside? :D
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 10, 2017, 02:26:13 AM
No Xellent I don't think :( I'll have to try a source a proper keyboard too, as it just has a ps2 adapter box, still waiting for the postie :D
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 14, 2017, 06:16:15 PM
Finally had my first go last night, what a great machine. The graphics are lovely with loads of colour, and the sound is excellent too, really impressed!

Next step is to fit the ram card, then look at some kind of hard drive to fit.
Title: Re: x68000 newbie saying hello! :)
Post by: Nicky Biscuit on November 14, 2017, 08:46:02 PM
Welcome :)

Enjoy the machine, they become very addictive though!!

Best

Nick
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 14, 2017, 09:07:35 PM
Cheers. Next question is does switch.x when setting the ram size save to the sram or settings somewhere? Do you set it once or does it have to be done various times? :)
Title: Re: x68000 newbie saying hello! :)
Post by: JulBS0 on November 15, 2017, 12:12:27 AM
Hi!

If I'm not mistaken, switch.x saves absolutely everything into the system SRAM.
SRAM settings are persistent... or may not be, depending on your system battery state.
Replacing the SRAM battery is a good idea, if not done already. You will at least avoid acid leakages.
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 15, 2017, 01:13:01 AM
Sound advice, I'm not sure what state the battery is in, so I'll check that out later when I fit the ram :)
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 15, 2017, 05:49:42 PM
I checked the battery and it looks, although I'll find out if it's kept the settings later :D On the Pro, it appears to be a sony coin cell type battery rather than the barrel one?
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 16, 2017, 06:09:28 PM
Sadly I need a battery, coin cell type :(

How on earth do you type _ when using an x68000 to keyboard adapter?
Title: Re: x68000 newbie saying hello! :)
Post by: repoMan on November 17, 2017, 04:17:22 AM
It depends how the firmware of the adapter has been designed and this must be documented in a manual I guess. Didn't came with yours?
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 17, 2017, 05:35:25 AM
It's a classicpcrescue one, sadly most of the instruction sheet is in japanese! :)
Title: Re: x68000 newbie saying hello! :)
Post by: vanpeebles on November 17, 2017, 06:39:08 AM
http://classicpc.org/image/x68000key.jpg

That one :)