Text only | Text with Images

nfg.forums

NFG Forums => SIG X68000 => Topic started by: Demetris74 on July 08, 2016, 10:26:41 PM

Title: Error Message
Post by: Demetris74 on July 08, 2016, 10:26:41 PM
Hi Guys

I am getting the below message on most of the image disk i create?

whats that related to?
Title: Re: Error Message
Post by: kamiboy on July 08, 2016, 11:51:33 PM
Bus error.
Title: Re: Error Message
Post by: Demetris74 on July 09, 2016, 12:46:49 AM
can this be related to caps as i never recaped mine
Title: Re: Error Message
Post by: kamiboy on July 09, 2016, 06:04:57 AM
Could be many things, but if the caps are still OG I'd say that is a good place to start.

Does your drive read the disk at all, or does it throw up that error at once?
Title: Re: Error Message
Post by: Demetris74 on July 09, 2016, 04:20:10 PM
Have made few image games like bubble bobble  Gradius 2, Arkanoid they work, some others i get this error, both drives load this games.
Title: Re: Error Message
Post by: kamiboy on July 09, 2016, 06:24:45 PM
Well, maybe the fault is with the disks then. But recapping is a good idea in any regard
Title: Re: Error Message
Post by: Demetris74 on July 09, 2016, 09:39:50 PM
Thanks Mate

Will recap the hole system from next week
Title: Re: Error Message
Post by: BlueBMW on July 10, 2016, 02:00:17 AM
Also check the seating of the IO slot riser card.  Poor contact there will cause a BUS error also.  Reseat your floppy drive connectors too as that too can cause a bus error.
Title: Re: Error Message
Post by: Demetris74 on July 12, 2016, 06:03:15 AM
Update

Today i made some more games and they work fine, the message only shows when trying to run Human68k to run switch.x
Text only | Text with Images