Print Page - Help Entering the Switch.x

Title: Help Entering the Switch.x
Post by: Demetris74 on July 07, 2016, 11:30:29 PM

Hi Guys

I am new to the forum, want to say hello,

Wanted to adjust my X68000 memory with switch.x. I have made images of Human68k all version and non of them boots in command prompt.
Problem is that i dont have a mouse to run it with in the windows interface. Anyone have an image to send me that boots directly to Dos in order to Run the Switch.x?

Or can guide me how to do it?

Title: Re: Help Entering the Switch.x
Post by: neko68k on July 08, 2016, 01:02:44 AM

Official Human68k 3.02
http://retropc.net/x68000/software/sharp/human302/

Title: Re: Help Entering the Switch.x
Post by: Demetris74 on July 08, 2016, 04:26:41 AM

Is that the image that goes directly to Command Prompt?

Title: Re: Help Entering the Switch.x
Post by: gojirien on July 08, 2016, 05:08:44 AM

Oh yes.

Title: Re: Help Entering the Switch.x
Post by: neko68k on July 08, 2016, 10:13:15 AM

yes

Title: Re: Help Entering the Switch.x
Post by: Demetris74 on July 08, 2016, 05:40:47 PM

Made the image but during but i get this message is this image corrupted?

Title: Re: Help Entering the Switch.x
Post by: famiac on July 09, 2016, 01:44:13 AM

It's saying "Bus Error"

What kind of x68k do you have?

First things first:
try resetting SRAM
Have you recapped the floppy drives?
How about the computer itself?

Title: Re: Help Entering the Switch.x
Post by: Demetris74 on July 09, 2016, 02:44:26 AM

Computer is CZ-600CE and bone stock, no recap done to any area.

i know i should do it but since it dint give me any troubles over the years!!!

nfg.forums

NFG Forums => SIG X68000 => Topic started by: Demetris74 on July 07, 2016, 11:30:29 PM