Text only | Text with Images

nfg.forums

NFG Forums => SIG X68000 => Topic started by: Goran on December 06, 2015, 04:12:51 AM

Title: KGB-PRK II - FPU, Memory board
Post by: Goran on December 06, 2015, 04:12:51 AM
Does somebody know how to set up KGB-PRK II - FPU, Memory board
thath the 16mhz coorocessor works on ace?

http://www.gamesx.com/wiki/doku.php?id=x68000:kgb-prkii_-_fpu_memory_board

I have set up the upper dipwitch like on the picturs and tried all 3 ways for dip switch.
16mhz doesnt work.

I have 2mb ram obd it. 2mb ram extension works
Title: Re: KGB-PRK II - FPU, Memory board
Post by: 98pacecar on December 06, 2015, 08:44:04 AM
Did you switch to use the float3.x instead of float2.x fpu driver?
Title: Re: KGB-PRK II - FPU, Memory board
Post by: Goran on December 06, 2015, 11:44:15 PM
No

How can i do that please explain me
Title: Re: KGB-PRK II - FPU, Memory board
Post by: Goran on December 06, 2015, 11:46:20 PM
Does the fpu needs then the 2mb ran on the pr2 or do i then still have a ram extension of 2mb or not?
Title: Re: KGB-PRK II - FPU, Memory board
Post by: Goran on December 06, 2015, 11:55:06 PM
Is the dip switch setting correct like this for the fpu?
Title: Re: KGB-PRK II - FPU, Memory board
Post by: Goran on December 07, 2015, 02:09:25 AM
I found answers but how to edit config.sys?

Like this:

With human floppy this snd then:

Type "ed.x config.sys" without the brackets to edit config.sys Press ESC and then X when you are done.

Title: Re: KGB-PRK II - FPU, Memory board
Post by: Goran on December 07, 2015, 05:55:18 PM
Can i play then whem it works with 16mhz on my ace?
Text only | Text with Images