Print Page - WTB aztec monster setup for sasi

Title: WTB aztec monster setup for sasi
Post by: frankmonk on October 15, 2015, 07:36:20 AM

Hi guys

Is there anyone here in europe who wants to sell his aztecmonster setup for a sasi machine or got any spare?

Thanks

Title: Re: WTB aztec monster setup for sasi
Post by: Opethian on October 15, 2015, 11:17:52 PM

To my knowledge aztech monster CF adaptors are all SCSI.

SASI is closer to IDE than SCSI you would probably be better off looking for an IDE > CF solution and adapting that to SASI.

Title: Re: WTB aztec monster setup for sasi
Post by: 98pacecar on October 16, 2015, 09:29:52 AM

Quote from: Opethian on October 15, 2015, 11:17:52 PM
To my knowledge aztech monster CF adaptors are all SCSI.

SASI is closer to IDE than SCSI you would probably be better off looking for an IDE > CF solution and adapting that to SASI.

I don't think this is correct. It seems that the Aztecmonster works fine with the SASI systems through the use of the SxSI driver.

http://nfggames.com/forum2/index.php?topic=5320.msg35780#msg35780

Title: Re: WTB aztec monster setup for sasi
Post by: hyperneogeo on October 16, 2015, 11:29:34 AM

The only compact flash that will work NATIVELY with Sasi is this one http://nfggames.com/x68000/Documentation/SCSI%20Adapter%20Manuals/CLPC-CFSxSI101%20SASI_SCSI%20Adapter.pdf

Title: Re: WTB aztec monster setup for sasi
Post by: RobIvy64 on October 16, 2015, 11:40:45 PM

opethian was just being sassy

Title: Re: WTB aztec monster setup for sasi
Post by: Opethian on October 16, 2015, 11:49:03 PM

I don't think its worth the trouble. Does 2dhboot even work on SxSI setups?

Title: Re: WTB aztec monster setup for sasi
Post by: famiac on October 19, 2015, 10:48:51 AM

Yes, it does

Title: Re: WTB aztec monster setup for sasi
Post by: Opethian on October 19, 2015, 10:59:55 PM

I had no luck with sassy

Title: Re: WTB aztec monster setup for sasi
Post by: BlueBMW on October 26, 2015, 02:02:32 AM

You may consider the SCSI2SD board instead. It works on SASI or SCSI systems just fine (I think without a driver on SASI even) and its much cheaper than the Aztec Monster (which also works on a SASI system with the SxSI driver)

Title: Re: WTB aztec monster setup for sasi
Post by: saturndual32 on October 30, 2015, 02:52:08 PM

BlueBMW, is this the one your are talking about?:

http://www.ebay.com/itm/SCSI2SD-3-5-includes-new-8GB-Genuine-SanDisk-microSD-card-adapter-/191702327688?hash=item2ca2596188:g:z4AAAOSwFnFWBHDt

Does it also work with the original X68K model?, would you recomend it over the Aztec Monster for that model in particular?

Title: Re: WTB aztec monster setup for sasi
Post by: BlueBMW on October 30, 2015, 04:03:32 PM

That is the one. I have not tried it on an original model before but I have installed one in an Expert, Super and XVI system and it works great. A much cheaper alternative to the aztec monster. I really dont see why it wouldn't work on an original model.

Title: Re: WTB aztec monster setup for sasi
Post by: saturndual32 on October 30, 2015, 04:15:38 PM

Quote from: BlueBMW on October 30, 2015, 04:03:32 PM
That is the one. I have not tried it on an original model before but I have installed one in an Expert, Super and XVI system and it works great. A much cheaper alternative to the aztec monster. I really dont see why it wouldn't work on an original model.

Thanks!
Lets see if i finally get to add one to my original X68K.

Title: Re: WTB aztec monster setup for sasi
Post by: frankmonk on December 25, 2015, 11:56:52 PM

@bluebmw

Do i need a special cable to connect with my sasi machine? I think i am going to buy one if it is Not Too tricky to hook it up

nfg.forums

NFG Forums => SIG X68000 => Topic started by: frankmonk on October 15, 2015, 07:36:20 AM