Text only | Text with Images

nfg.forums

NFG Forums => SIG X68000 => Topic started by: costa on July 28, 2014, 07:58:52 PM

Title: Connect HDD led to SCSI-to-IDE adapter
Post by: costa on July 28, 2014, 07:58:52 PM
Hi Guys,

I Searched for a thread about connecting the HDD led on the XVI to the aztecmonster CF adapter, but did not find.

Anyone has experience on doing this? Is it a simple task?
Title: Re: Connect HDD led to SCSI-to-IDE adapter
Post by: Nelsinho on July 30, 2014, 04:50:05 AM
Roni,

I linked a direct wire the on cabinet Hdd led.

Works fine.
Title: Re: Connect HDD led to SCSI-to-IDE adapter
Post by: costa on July 30, 2014, 09:10:57 AM
Quote from: Nelsinho on July 30, 2014, 04:50:05 AM
Roni,

I linked a direct wire the on cabinet Hdd led.

Works fine.

You mean, I can bypass all circuits and pull a pair of wires from the AztecMonster (the HDDD out pins, well identified in the board)  and solder to the HDD led on the X68K?
Title: Re: Connect HDD led to SCSI-to-IDE adapter
Post by: Nelsinho on July 30, 2014, 11:29:21 AM
Yes, no problem.

reagards.
Text only | Text with Images