nfg.forums

NFG Forums => SIG X68000 => Topic started by: RadicalR on July 13, 2014, 02:22:09 PM

Title: HD pins on a X68k ACE?
Post by: RadicalR on July 13, 2014, 02:22:09 PM
I can't find it anywhere! I found the FD pins, but still looking for the HD ones!
Title: Re: HD pins on a X68k ACE?
Post by: H68k on July 13, 2014, 03:06:19 PM
If your planning to fit a hard disk, SD card adaptor etc etc.. then see this guide:

http://gamesx.com/wiki/doku.php?id=x68000:hard_drive_on_sasi_machine (http://gamesx.com/wiki/doku.php?id=x68000:hard_drive_on_sasi_machine)

Title: Re: HD pins on a X68k ACE?
Post by: eidis on July 13, 2014, 05:07:35 PM
 Hi RadicalR !

Here is the full BOM for constructing a SASI cable.

5pcs IDC FC-20 Connector 20 PIN Female Header 2.54 mm
http://www.ebay.com/itm/5pcs-IDC-FC-20-Connector-20-PIN-Female-Header-2-54-mm-/251456271905?pt=LH_DefaultDomain_0&hash=item3a8bf63621 (http://www.ebay.com/itm/5pcs-IDC-FC-20-Connector-20-PIN-Female-Header-2-54-mm-/251456271905?pt=LH_DefaultDomain_0&hash=item3a8bf63621)

50pin female IDC connector (1 piece)
http://www.ebay.com/itm/2-x-Conector-IDC-50-pines-Hembra-para-cable-cinta-plano-retenedor-de-cable-/190867020511?pt=LH_DefaultDomain_186&hash=item2c708f9adf (http://www.ebay.com/itm/2-x-Conector-IDC-50-pines-Hembra-para-cable-cinta-plano-retenedor-de-cable-/190867020511?pt=LH_DefaultDomain_186&hash=item2c708f9adf)

50 Ways COLORFUL Flat Ribbon Cable For 2.54mm 2x25 array IDC Socket.1meter
http://www.ebay.com/itm/50-Ways-COLORFUL-Flat-Ribbon-Cable-For-2-54mm-2x25-array-IDC-Socket-1meter-/291150661019?pt=LH_DefaultDomain_0&hash=item43c9ee859b (http://www.ebay.com/itm/50-Ways-COLORFUL-Flat-Ribbon-Cable-For-2-54mm-2x25-array-IDC-Socket-1meter-/291150661019?pt=LH_DefaultDomain_0&hash=item43c9ee859b)

IDC/IDS Ribbon Cable Crimper/Crimping/Crimp Tool
http://www.ebay.com/itm/IDC-IDS-Ribbon-Cable-Crimper-Crimping-Crimp-Tool-/300641240914?pt=LH_DefaultDomain_15&hash=item45ff9d4752 (http://www.ebay.com/itm/IDC-IDS-Ribbon-Cable-Crimper-Crimping-Crimp-Tool-/300641240914?pt=LH_DefaultDomain_15&hash=item45ff9d4752)

Keep the scene alive !
Eidis
Title: Re: HD pins on a X68k ACE?
Post by: RadicalR on July 14, 2014, 01:13:08 AM
Thanks for those, but where do I plug it into the X68k?
Title: Re: HD pins on a X68k ACE?
Post by: BlueBMW on July 14, 2014, 03:04:57 AM
If your system is a non HD system then you will have a short ribbon cable between the bottom board and the rear panel board (with the external floppy and HD connectors)  You will replace this cable with the one you fabricate.  It will have three connectors on it instead of two like the cable in your machine now.