Print Page - PCE Duo RX RGB mod advice

Title: PCE Duo RX RGB mod advice
Post by: hellbelly on April 11, 2004, 02:05:10 AM

I've been asked to make an RGB scart lead with an amplifier for someones Duo rx. This guy is in a different country to me, so I would like to avoid any trial and error, plus - I've never even seen a PCE before, let alone taken one apart to play around.

I've squeezed the N64 amplifier into a scart plug before - am I right in assuming that the N64 amplifier, which I've seen around here somewhere, isn't brilliant when used with a PCE?

I've been looking at building the amplifer as shown on the RGB mod page on gamesx, I see it needs 12V aswell as the normal 5V. I have a couple of questions about it:

Which scart pins do the 5V and 12V signal goto? I assuming 8 and 16?

Will it be easy for the other person wiring up the socket in the Duo to find a 12V source?

Apologies for the simple questions!

Cheers
Pete

Title: PCE Duo RX RGB mod advice
Post by: Anderson 21 on May 22, 2004, 11:15:08 PM

i make pce booster cables. goes between the scart plug and tv. works a treat.
I live in uk so let me know if you want one.

Title: PCE Duo RX RGB mod advice
Post by: hellbelly on May 23, 2004, 12:30:32 AM

hmmm... if you pass me on your email address, i'll pass it onto the guy i know who needs one.

cheers
pete

Title: PCE Duo RX RGB mod advice
Post by: fragment on June 15, 2004, 12:41:51 PM

Lawrence, could you post up another diagram for clarification on the amplifier for the RGB TurboDuo

Title: PCE Duo RX RGB mod advice
Post by: NFG on June 15, 2004, 02:38:47 PM

(http://nfg.2y.net/temp/rgb.jpg)

nfg.forums

NFG Forums => RGB + Video Discussions => Topic started by: hellbelly on April 11, 2004, 02:05:10 AM