nfg.forums

NFG Forums => RGB + Video Discussions => Topic started by: dethbox on March 17, 2004, 07:05:03 AM

Title: Tandy CM-11
Post by: dethbox on March 17, 2004, 07:05:03 AM
Am I wasting my time trying to use this monitor? A little spec. info to chew on...

Scanning Frequency:
  Horizontal...........................................15.701 Hz +/- 500 Hz
  Vertical...............................................60 Hz +/- 1.0 Hz

I have gotten the SMS to display a playable image on this monitor, playable but not enjoyable. The image is stable both horizontally and vertically, but the colors are all garbage.

Thanks.
Title: Tandy CM-11
Post by: benzaldehyde on March 17, 2004, 08:14:34 AM
Frequencies are right. However, if your colors are bad, it might just be an plain-old beat-up monitor. Finding one with a good frequency range is one thing; whether or not it works is the other.
Title: Tandy CM-11
Post by: dethbox on March 17, 2004, 09:09:11 AM
As far as I can tell the monitor works fine, when hooked up to a computer that is. The image is nice, crisp and clear. Any thoughts on that?
Title: Tandy CM-11
Post by: benzaldehyde on March 17, 2004, 01:17:42 PM
Sounds like you may have a digital monitor there. What kind of computer do you use with it?
Title: Tandy CM-11
Post by: dethbox on March 17, 2004, 02:17:58 PM
Ive used the monitor with many a computer, basically anything with an open ISA slot will work. I dont think it is a digital monitor. Let me check the spec sheet again...

The spec sheet ain't telling me anything usefull. Some google hunting is telling me that it may be a CGA monitor, could be! It says "High Resolution RGB" monitor on the back. Another thing google said...

Optional Extras:
     $699.00   CM-11 High-Resolution RGBI Colour Monitor
     13-inch screen, 640 � 200 pixels

That was for some system from 1989. So this monitor has to be atleast that old.
Title: Tandy CM-11
Post by: NFG on March 17, 2004, 02:32:01 PM
RGBI is digital (the I is for Intensity, a brightness signal that only digital monitors use.
Title: Tandy CM-11
Post by: dethbox on March 17, 2004, 02:34:48 PM
So basically ive payed $4 for a worthless RGB monitor? Please tell me it is so useless that I may aswell kick it or put a hammer through it. Thanks.
Title: Tandy CM-11
Post by: benzaldehyde on March 18, 2004, 12:41:26 AM
Yup, I'm afraid it's worthless. Don't worry, most of us make the same mistake his first time (mine was $15). It's only good for old computers like the Commodore 64/128, in which it was used as a rather shitty hi-res mode. Luckily, this format dies a quick death, though leaving an inundation of worthless monitors lying around.  :angry: