Hi all!,I would like to make my own HU CARDS,as I do with Mega Drive cartridges,with Megadrive is really easy task just burn with the eprom programmer taking into account is needed the byte swap...,but with PCE when i burn the rom into a eprom this eprom content is not recognizable even in an emulator... ???,if any know what im doing wrong...thanks in advance.
I had no trouble burning EPROMs. If you can't burn content to the chip nor make that same content work in an emu (!?) you're definitely missing a simple step.
yeah!im doing something wrong,must have a different step from how to do it in Megadrive and PC Engine,when I open a ROM PCE with eprom programmer...and i save...just for try...i choose ROM and save as ALL FILES and i call for example DARIUS.PCE,and not work...,but when i do this with master system rom or megadrive rom works... ???,thanks for the patience :D.
When I was burning the ROMs on my PCE proto board, I just:
Selected the appropriate device (I've used both flash and EPROMs)
Loaded .pce file into the burner software
Pressed the GO button.
It just works, it's not tricky.
Quote from: Lawrence on July 18, 2011, 08:37:37 AM
When I was burning the ROMs on my PCE proto board, I just:
Selected the appropriate device (I've used both flash and EPROMs)
Loaded .pce file into the burner software
Pressed the GO button.
It just works, it's not tricky.
i have no ideas...,the most strange for me is i have no problem with other consoles...,really thanks Lawrence.