I've wired up a scart cable according to http://members.optusnet.com.au/eviltim/gamescart/gamescart.htm#snes (http://members.optusnet.com.au/eviltim/gamescart/gamescart.htm#snes) and it won't let me switch to that input. I've never used a scart TV before, usually arcade monitors and pvms. The only difference between those diagrams is that i am using composite sync, rather than composite video. Any ideas? USIng +5v as a source on pin8 with a 150ohm resistor from 8 to 16. Do i need a higher voltage on pin 8?
Thanks!
Make sure the "Area" on the menus is configured for "Europe" and the country is set to "Other". If the monitor is set to a region other then Europe, the SCART input won't show up as an available input. The only downside of leaving the monitor set to a country other then USA or Canada is that you can't use the cable TV tuner.
thank you! ill try that as soon as i get home...
Ugh, ill be relieved and annoyed if thats the answer.
That solved it! Thanks again!