Hello :)
Been trying to make my Japanese Model 1 Saturn display in 50Hz for those few PAL games that wont run in 60Hz properly. I already have the region mod figured out, no problem. And i have 50/60Hz modified several PAL machines with great results.
This Saturn is the very first model 1 Saturn. The one with double LED's. The motherboard says V0.5.
I figured that Jumper 1 would be a good place to start since that's the one used when doing this mod on a MegaDrive. I located JP1 in no time and confirmed that it was indeed connected to pin 79 of the Videochip. Just like this guide says: http://mmmonkey.co.uk/console/sega/saturn5060.htm (http://mmmonkey.co.uk/console/sega/saturn5060.htm)
The common point between JP1 and JP2 was connected by a thin trace to 5V. I cut that trace, made sure there was no connection and soldered wires to the three points:
http://i40.photobucket.com/albums/e236/Konsolkongen/27072010587.jpg?t=1280249790 (http://i40.photobucket.com/albums/e236/Konsolkongen/27072010587.jpg?t=1280249790)
Blue is common, Green is Ground and Yellow is 5V.
After connecting these wires to a switch the mod should now be working... (common to middle leg... ;) )
Well when the switch is set to 60Hz (5V) the Saturn works perfectly like it always has. When set to 50Hz (Ground) this is what happens:
http://i40.photobucket.com/albums/e236/Konsolkongen/27072010593.jpg?t=1280253597 (http://i40.photobucket.com/albums/e236/Konsolkongen/27072010593.jpg?t=1280253597)
I only get a black screen when using my XRGB-3 :(
My PAL Saturn which has the same mods works perfectly in 50Hz on my TV and XRGB-3.
Can i do something to make this Saturn show in 50Hz too or can it simply not be done?
Here are two pictures showing the Motherboard on both sides:
http://i40.photobucket.com/albums/e236/Konsolkongen/27072010589.jpg?t=1280254253 (http://i40.photobucket.com/albums/e236/Konsolkongen/27072010589.jpg?t=1280254253)
http://i40.photobucket.com/albums/e236/Konsolkongen/27072010590.jpg?t=1280254253 (http://i40.photobucket.com/albums/e236/Konsolkongen/27072010590.jpg?t=1280254253)
Thank you :)