Hi guys,im Brazilian, is my first post that will show a scheme how to adapt a 3º joystick to a snes. He works only like 3P not 4p or more. By using barely a diode :o..
Sorry my bad english. ;D
Scheme
http://img132.imageshack.us/i/oesquema.jpg/ (http://img132.imageshack.us/i/oesquema.jpg/)
connect the wires 1,2,3,7 from 2º joystick to the same wires on 3º joystick, the wire 4 must be connected to a diode then connected to pin 5 from entrance (11pins) from the joysticks .
http://img43.imageshack.us/i/vc2v.jpg/ (http://img43.imageshack.us/i/vc2v.jpg/)
3 joysticks connected to snes
http://img8.imageshack.us/i/closevg3p.jpg/ (http://img8.imageshack.us/i/closevg3p.jpg/)
show 4p but only 3p works (game->ISSS)
http://img8.imageshack.us/i/38209009.jpg/ (http://img8.imageshack.us/i/38209009.jpg/)
http://img8.imageshack.us/i/4p2.jpg/ (http://img8.imageshack.us/i/4p2.jpg/)
thx guys
if anyone make 4P to work . post here or talk to me please
Welcome to GamesX. What's the availability of the multi-tap in Brazil? Theoretically, you can get up to five controllers connected to the Super Nintendo, but I can't think of any games that supported that many players off the top of my head. Also, unless I'm mistaken all those signals are multiplexed off of the Player 1 port, so there might be other connections you need to make similar to what you've already illustrated.
Thx! its a nice forum :) yes are multitaps available here but it is hard to find, this mod was only experimental(just to see if it could be done) ;D, only bomberman suport 5 p i guess.thanx for reply guy!