How to convert or create an adaptor for snes or terminator(http://ultimateconsoledatabase.com/famiclones/terminator.htm) controller to work on megadrive/genesis; it's possible?
The controllers for terminator console has the same socket as the megadrive/genesis controllers
Many consoles use the 9-pin connector, but do not have the same encoder chip. Use of the same type of connector does not also reliably indicate the same signalling or pinout.
you need an additonal microcontroller or some setup with handful of logic chips to do the signal and function conversion to get SNES or NES/FC controller working on MD...