Can anyone tell me where latch clock and data are on this controller? I saw some schematics floating about but its not for this controller..Of the 9 pins 5 are used. I thinks pins 2 and 3 are the power source and ground (from memory) but I'm not having any luck with the others. I think the controller is much like a snes. I here the snes will work on the 3do if the pins are re-wired.
Ah found it never mind..
for feature inquiriers.
3DO pinout:
Pin Description
1 GND
2 VCC
3 Audio 1
4 Audio 2
5 VCC
6 P/S (Latch)
7 Clock
8 GND
9 Data