Hey all
I have been thinking about this idea for some time now - interfacing a ps2 dualshock controller with a psp using some pics, and the original controller connectors.
Any thoughts and ideas on the matter would be great, i have tapped/soldered every button / control in the psp , ready to be interfaced, and i have found several good links, and some loosely related.
Please post if you think you can add some input on the matters, and here are the links.
http://www.gamesx.com/controldata/psxcont/psxtop.html
http://sophiateam.undrgnd.free.fr/psx/index.html
http://www.instructables.com/id/SS7KMR9F4R3E4KU/
thanks
oh also forgot to add, i have done this with a point to point connection from controller to psp, but i would like to stream line it
Someone has beaten you to it:
http://www.acidmods.com/forum/index.php?topic=2321.0
F00's design incorporates many of your requirements, including an elegant cable connector. Here's another mod using the on-board connector:
http://www.acidmods.com/forum/index.php?topic=18967
hmm..maybe i wasnt clear enough
thanks, id already seen those links, and i haev done a mod exactly like that, interfacing th ebuttons to the psp point to point, using different connectors, and lots of wiring. I would like to know if it possible to take the signals from the ps2 controller out of the standard dualshock connecto 9 pin plug, and convert them with a micro controller, into standard button press signals, and do the same wit the psp, so that i could just plug in any normal un modded ps2 controller into a dualshcok connector attached to the psp
Programming a PIC is outside the scope of this forum, but it is possible. You probably want to have a look at the PSX-to-USB convertors that are commercially available to get an idea of how PS2 controller output is decoded.
Please capitalize abbreviations and acronyms as needed for clarity. A pic is a picture, whereas a PIC is a programmable integrated circuit.