Print Page - Newbie question on RGB on an NTSC SNES

Title: Newbie question on RGB on an NTSC SNES
Post by: FortMax on February 16, 2008, 10:59:26 AM

Is the only thing I need to do to get working RGB on an NTSC SNES the three 220 uf caps?

Also, when is pin-10 (+5v) used?

Finally, how do PAL systems send the sync signal? Is it sent with Green, or over Composite Video?

Title: Re: Newbie question on RGB on an NTSC SNES
Post by: NFG on February 17, 2008, 07:19:04 PM

1. Yes
2. When you need some voltage for either the TV or circuitry in your cable
3. There's no composite sync on PAL systems, only composite video carries a sync signal

Title: Re: Newbie question on RGB on an NTSC SNES
Post by: FortMax on February 18, 2008, 02:14:46 AM

Thsnks!

nfg.forums

NFG Forums => RGB + Video Discussions => Topic started by: FortMax on February 16, 2008, 10:59:26 AM