Print Page - Rewiring PAL scart to VGA connector? JAP 21-Pin RGB to VGA?

Title: Rewiring PAL scart to VGA connector? JAP 21-Pin RGB to VGA?
Post by: eastbayarb on January 30, 2008, 08:42:21 AM

I got a PAL SCART cable for sega genesis 2 but I wanna connect it to my Mitsubishi Megaview via VGA connector (female).

Anyone know how?

Also I wanna rewire my Sega Saturn JAP 21-PIN RGB cable to VGA connector.

Title: Re: Rewiring PAL scart to VGA connector? JAP 21-Pin RGB to VGA?
Post by: Endymion on January 31, 2008, 02:27:13 AM

Here is the pinout for SCART (http://www.gamesx.com/wiki/doku.php?id=av:scart_connector). Take the connector off, get a roll of tape and a sharpie, and label the wires from each pin. Then attach those wires to a VGA terminator. Here is the pinout for VGA (http://www.gamesx.com/hwb/co_VGA15.html). Just follow that chart and you're done.

Saturn? Same deal. Here is the pinout for JAP RGB (http://www.gamesx.com/wiki/doku.php?id=av:japanese_rgb-21). Label the wires and set them to VGA per the chart above.

Title: Re: Rewiring PAL scart to VGA connector? JAP 21-Pin RGB to VGA?
Post by: blackevilweredragon on January 31, 2008, 05:39:17 AM

Will this projector support 15KHz input?

Title: Re: Rewiring PAL scart to VGA connector? JAP 21-Pin RGB to VGA?
Post by: Endymion on February 01, 2008, 12:43:33 AM

All Mitsubishi Megaviews (CRTs, not projectors) do 15 and 31KHz over the VGA so it's good for this.

nfg.forums

NFG Forums => RGB + Video Discussions => Topic started by: eastbayarb on January 30, 2008, 08:42:21 AM