Print Page - Service request: PS2 RGB cable

Title: Service request: PS2 RGB cable
Post by: thchardcore on June 14, 2006, 09:05:43 PM

Hi, I need a ps2 rgb cable, and I don't have the experience or the time to build one. But I will pay for anyone who can set me up with one shipped in the USA.

I have a commodore 1084 monitor with the following pinout http://www.technick.net/public/code/cp_dpa...convid_c1084_ds (http://www.technick.net/public/code/cp_dpage.php?aiocp_dp=pinconvid_c1084_ds)
but it has a male plug at the monitor.

If anyone can make on of these for me, I can offer them $20 shipped for this.

Please let me know.

Mike

Title: Service request: PS2 RGB cable
Post by: FM-77 on June 15, 2006, 04:00:08 AM

Why don't you just buy (a new) one? They cost like $3.

Title: Service request: PS2 RGB cable
Post by: Guest on June 15, 2006, 12:53:29 PM

I'm under the impression that I have to add caps, resistors and a sync seperator to the mix, are you saying I can just hack a scart cable and skip the DIY method?

Title: Service request: PS2 RGB cable
Post by: FM-77 on June 15, 2006, 10:25:24 PM

I'm saying you can buy an official pre-made Sony PS2 RGB cable. They are selling them (at least here in Europe).

Title: Service request: PS2 RGB cable
Post by: Kiriko on June 16, 2006, 12:54:56 AM

QuoteI'm saying you can buy an official pre-made Sony PS2 RGB cable. They are selling them (at least here in Europe).

I am pretty sure the guy who asked for the RGB cable isn't in Europe.
And to answer the question from the 1st post... Yes, you need a sync separator and some resistors to have it work on the 1084.

Title: Service request: PS2 RGB cable
Post by: FM-77 on June 16, 2006, 09:59:58 PM

nfg.forums

NFG Forums => RGB + Video Discussions => Topic started by: thchardcore on June 14, 2006, 09:05:43 PM