Am I supposed to make a swtich that goes to pin 4 on the chip and then one wire to a +5 spot and one wire to a ground spot?
If i�m correct about this when is the chip then dissabled, on the +5 or when its connected to ground?
Were can I find a +5 spot on the pcb?
Here's a hint for your next post:
Tell us what you're talking about. Maybe even link to it. Proofread your post.
Care to try again?
Sorry about that. Feeling a bit tired.
I�m talking about the lockout mod
http://www.gamesx.com/importmod/sneslockout.htm (http://www.gamesx.com/importmod/sneslockout.htm)
My question is should a let the switch go betwen a +5V, the pin 4 and a ground to disable/enable the chip?
That's exactly what it should do.