Print Page - How to Mod an Snes to Play Euro games

Title: How to Mod an Snes to Play Euro games
Post by: muji112 on June 07, 2005, 02:44:10 PM

I have an SNES here that i cant find any online tutorials for modding. The mod chip on this SNES is F411B.

From what i've read you need to disconnect pin 4, im not exactly sure as to how i should go about doing this either, is a desoldering braid part of the equation in disconnecting pin 4??

Also after i disconnect pin 4 should i solder a wire to the now disconnected pin 4 and run it towards another part of the SNES and solder it there?

If this is the case wehre exactly do i solder the other end of the wire?

Any responses would be greatly appreciated

Title: How to Mod an Snes to Play Euro games
Post by: atom on June 08, 2005, 05:42:48 AM

Double posting is a no no. These forums are small enough as to where we will find it if you post it, and most of us check these at least once a day.

nfg.forums

NFG Forums => Import Mods => Topic started by: muji112 on June 07, 2005, 02:44:10 PM