Anyone know the pinout of Playstation 2 power supply (SCPH 10000, 30000), and the output voltage.
thank.
Mery chrismass
holding it with the components toward you and the power output connector in the top right, the pinout is as follows: 12V 12V GND GND
i just looked at the underside and saw the pins were in groups of two connected to the same traces.. then shoved a multimeter in it to be sure it was 12v.. obviously the trace which goes right to the edges of the board and has the head sink crap soldered to it is going to be ground..
it outputs about 8 amps apparently.. and the ps2 needs it too, i couldnt get it running off 5, just went on then right off again and back to standby
Ok very thank. I try to use a PC power supply.
My PS2 10000 power supply is burn, dead and it's impossible for me to find a compatible power supply for this model (the power connector is at diferent place).
If you know where find SCPH-10000 power supply post here !
Very thank phreak97 ! ;)