Print Page - Jamma to RGB problem

Title: Jamma to RGB problem
Post by: Javicious on November 11, 2004, 02:22:18 AM

Hello.

I'm trying to connect a jamma board to a normal TV, but I can get correct video. I've looked at gamesx.com "jamma connector pinout" and "TV Scart cable".

I only want video, no sound. The jamma outs R, G, B, Sync and Ground signals. The problem is I'm not sure were to wire sync, and don't know if with only these 5 cables the scart can work or I need to wire some other.

Thanks.

NOTE: I grounded all 3 RGB signals with same gnd from jamma.

Title: Jamma to RGB problem
Post by: Javicious on November 11, 2004, 07:25:25 AM

Lol! I mistake pin numbers in the scart and wired wrong!
Now all is working perfectly!

thanks

Title: Jamma to RGB problem
Post by: NFG on November 11, 2004, 08:08:41 AM

nfg.forums

NFG Forums => RGB + Video Discussions => Topic started by: Javicious on November 11, 2004, 02:22:18 AM