hi guy,
for first i apologize for my poor english....
i have a little problem with the guide on
http://www.mikeg2.freeserve.co.uk/masterful/md2lang.html (http://www.mikeg2.freeserve.co.uk/masterful/md2lang.html)
The language switch it's ok, but now the first joypad (A,B,C Start) are going crazy... :blink:
only for the first player (2nd player it's ok!)
Start don't work
A don't work
B is B+C
C is Start
:((((((((((((
someone can help me? I can send a scan of the pcb portion.
Please help me.
Thanx
if u can help me, write me here or on [NFG Edit: Email removed by request]
Many thanx
i'have solved with a very little bridge ;) from the pin of joypad's port to the pcb upper side (on the interested point) eh eh eh
Attention when you use a cutter!!!
Ciaooo
Italian?
Yes! ^___^
Do you like pizza? :D
I have solved both language & ntsc/pal switch....
I'm now into another project: convert a Pro-fighter ~like arcade 8 button~ joystick multisystem (neo-geo, amiga, genesis-md ~but only 3 buttons, damn!~, snes/sfamicom) into a joystick for genesis-md 6 buttons...
i hope.
Ciao! ;)
I love pizza.
Good luck with your project! We have talked about similiar things before on previous threads.