nfg.forums

NFG Forums => SIG X68000 => Topic started by: Bajalento on July 20, 2012, 03:55:34 AM

Title: Question about Human68k version 2.0
Post by: Bajalento on July 20, 2012, 03:55:34 AM
Hello to all fellow members.

Excuse me if I do not start properly and I have to report before elsewhere in the forum, if so please say to me the place and I,ll do, excuse me pretty bad too because I speak English.

I am a user with 2mb X68000 ace and a 603-d monitor, the problem I have is I have no mouse and I have version Human68k operating system version 2.0. I have read whole thread but all I found nothing of whether it is possible to access without mouse to "switch program". Could anyone help me with this.

Regards
V
Title: Re: Question about Human68k version 2.0
Post by: SuperDeadite on July 20, 2012, 12:56:20 PM
If you have a pure Human68k disk (no GUI), you only need a keyboard.
Title: Re: Question about Human68k version 2.0
Post by: Bajalento on July 20, 2012, 07:42:13 PM
Thank you so much SuperDeadite.

These are the disks I have:

http://imageshack.us/photo/my-images/801/dsc0016lz.jpg/ (http://imageshack.us/photo/my-images/801/dsc0016lz.jpg/)

http://imageshack.us/photo/my-images/38/dsc0015gh.jpg/ (http://imageshack.us/photo/my-images/38/dsc0015gh.jpg/)

The two blue one puts human68k 1.0 and is a word processor like Microsoft Word primitive:

http://imageshack.us/photo/my-images/256/dsc0010nc.jpg/ (http://imageshack.us/photo/my-images/256/dsc0010nc.jpg/)

The second blue put Human68k 2.0 to read the system says Human.sys, and the third red gets 2.0 and goes into a kind of operating system:

http://imageshack.us/photo/my-images/805/dsc0014up.jpg/ (http://imageshack.us/photo/my-images/805/dsc0014up.jpg/)

Perhaps they can not access the "switch program", the truth is that I dislike not being able to play games like Final Fight, Strider, Marchen Maze, because despite having 2mb I can not configure my system to them, I'm pretty disgusted with this. Not to do because I do not know anyone who could give me this program to change your BIOS.

Thank you all for the help. Forgive my ignorance on this system.
Title: Re: Question about Human68k version 2.0
Post by: SuperDeadite on July 20, 2012, 08:33:08 PM
Yeah that's the very old version with the GUI.  Without a mouse you need a pure boot disk that goes straight to command prompt.
Where are you located, many people here could send you a disk, just a matter of who is closest.
Title: Re: Question about Human68k version 2.0
Post by: Bajalento on July 20, 2012, 09:44:40 PM
Thank you SuperDeadlite.

I tried to access the route to run that program but it has been impossible. I am from Spain.

Regards
Title: Re: Question about Human68k version 2.0
Post by: BlueBMW on July 21, 2012, 01:14:39 AM
Im sending Bajalento a mouse and human 68k 3.02  so he should be taken care of.
Title: Re: Question about Human68k version 2.0
Post by: Bajalento on July 21, 2012, 01:43:50 AM
 ;)Thank you so much. I am new but I think you have a large community in what I can and will try to help my English. :D
Title: Re: Question about Human68k version 2.0
Post by: Taka on July 21, 2012, 03:29:38 AM
Hi :)

1MB
switch M=1024

2MB
switch M=2048

4MB
switch M=4096
Title: Re: Question about Human68k version 2.0
Post by: Bajalento on July 21, 2012, 06:51:30 AM
Hi Taka.

Then with Disk red 2.0 I should introduce switch m=2048 command list?

Thank you Taka