Hello all!
My first post right here :)
I hope I do well!
I am Jonathan from the UK, and I have just purchased an NTSC RGB modded N64. I have been looking at this monitor to use along with my modded N64:
Sony Profeel KX-27PS1 monitor, which you can see here http://www.ebay.com.au/itm/Sony-Trinitron-Colour-Monitor-KX-27PS1-PROFEEL-/300617930328y (http://www.ebay.com.au/itm/Sony-Trinitron-Colour-Monitor-KX-27PS1-PROFEEL-/300617930328y) - if you look at the second image / read the description it shows the inputs that the monitor accepts. The problem is I don't know if the SCART input would accept and display the RGB signal from the N64. There is a specific 34 pin multi RGB input, but I have no idea where I would get that kind of lead for the N64 (I guess I would have to make my own?)
Oh, and urm, one very important thing - will that monitor display NTSC signals??
If anyone could help me answer the above questions I would be extremely grateful.
If this monitor is not going to work, it would be amazing if someone could point me towards one of the compatible sony PVM monitors instead.
I look forward to your replies.
Kind regards
Jonathan
Not sure I you got he message I sent it will work
Bu you need to add 3v or more to pin 8 for the profeel to switch over to rgb you will find when you plug it in it will have an unstable picture until you ad voltge to pin 8 I used an transformer this is how I run my pc engine mega drive psx and snes
Quote from: nevarna on September 04, 2012, 04:00:11 PM
Not sure I you got he message I sent it will work
Bu you need to add 3v or more to pin 8 for the profeel to switch over to rgb you will find when you plug it in it will have an unstable picture until you ad voltge to pin 8 I used an transformer this is how I run my pc engine mega drive psx and snes
Thanks dude. I did get the message. I'll reply via PM.
I'll share my results with everyone else once I've spoke to nevarna on how this is done.