Print Page - What Type of Wire whould I use to make my mods???

Title: What Type of Wire whould I use to make my mods???
Post by: Segasonicfan on December 29, 2003, 07:41:30 AM

I've been using copper and aluminum wire for my mods (cause some guy at Radio Shack said they should work) but I don't think they are carrying the voltage at all (as in both my attempted Genesis and Nomad mods), does anybody know they correct type of wire I should use. I really need to know...Thanks!

-Segasonicfan

Title: What Type of Wire whould I use to make my mods???
Post by: NFG on December 29, 2003, 12:42:09 PM

Wire is wire, if it's metal you're using the right stuff.

Title: What Type of Wire whould I use to make my mods???
Post by: Scared0o0Rabbit on December 31, 2003, 07:36:34 AM

QuoteWire is wire, if it's metal you're using the right stuff.

You probably want your metal wire to have a rubber or plastic wrapping on it as well, otherwise you could be in a world of hurt.

Title: What Type of Wire whould I use to make my mods???
Post by: mattthemodder on December 31, 2003, 09:31:19 AM

For some mods that really stiff wire can be useful. But then when you put the casing on you'll proly find that it won't fit and they'll be a b1tch to move again, and with flexible it will get in the way. Blue Tac is the key :lol:

Title: What Type of Wire whould I use to make my mods???
Post by: Talasonic on January 21, 2004, 02:20:47 PM

You should probably only use copper wire. I would buy cat-5 solid network cable, and take it apart to get the individual, insulated strands. This is very cheap, because there are 8 strands in the jacket, and it's flexible. If you can't find it for free, you can get 50 or 100 feet of this or cat-3 at home depot. Either would be fine.

What you don't want is normal phone wire, because it's too thick and stiff. 22 guage is prolly the biggest you want, 24 being smaller and better.

Title: What Type of Wire whould I use to make my mods???
Post by: NFG on January 21, 2004, 04:27:36 PM

I get most of my mod wire from either ribbon cables in old PCs (floppy + HD cables) or in serial/parallel/SCSI cables, which hold some lovely colour-coded stranded wire.

The solid-core as found in phone + LAN cabling is tricky to work with as it is very stiff, but because it's solid and narrow you can attach it to tinier points. Stranded wire absorbs more solder and adheres to new surfaces more quickly, but you'll have trouble with the strands peeling if you're not good with the soldering iron yet.

Title: What Type of Wire whould I use to make my mods???
Post by: Segasonicfan on January 22, 2004, 01:41:39 AM

yeah...ive noticed that about stranded wire :/ im getting pretty good with the soldering iron though (minus dropping it on the carpet and setting my elbow on it...lol) so i tend to prefer the stranded stuff . pain when it splits though xp

thanks guys,
-segaosnicfan

Title: What Type of Wire whould I use to make my mods???
Post by: dark_link on February 04, 2004, 09:40:15 AM

try using an old psx controller wire

you can get them cheap at a game store

nfg.forums

NFG Forums => Import Mods => Topic started by: Segasonicfan on December 29, 2003, 07:41:30 AM