nfg.forums

Meanwhile i think too that it is a fault of the Sony TV, not the XVI  The XVI has the pots too, but that
isn´t the problem cause on other displays the colors are right.
i hope that someone has an idea or had a similar problem before.

Knight Arms, it drove me crazy, in all the HDD images I tried it runs without problems, except in this one unfortunately.
The only solution was to copy the XDF images to floppy disk.

I noticed when using the Cyber Stick that when switching modes from digital to analog, it causes the game menu to freeze.
I think this game had problems of its own.

The good news is that all the other games I've tried work fine.

Tests carried out on the X68000 XVI, 12MB RAM (TSR brand) on HENKAN BANCHO PRO.

Sorry, I got confused with the baller version, I stand corrected, the most stable version of Super Hang-On belongs to Eidis contained in its first released version:

https://gamesx.com/wiki/doku.php?id=x68000:sxsi_disk_image_with_games_and_lots_of_mdx_files

I've tried too many versions...
A little slow to load but this works well copied in the incrediblehark image.

Tests carried out on the X68000 XVI, 12MB RAM (TSR brand) on HENKAN BANCHO PRO.

Quote from: z964 on May 22, 2024, 11:04:14 AMI tried a 23mm ball bearing from this ebay seller: https://www.ebay.com/itm/335131689684?var=544365350519

It works better than an original mouse ball for me, but sure does make the mouse a lot louder.

Thank you!

I don't have an XVI but the Expert has separate potentiometers for each colour, so I assume the XVI has them too.

Quote from: kanjiology on May 23, 2024, 12:25:41 AMIt's just a DIN-8 cable, you can buy them anywhere. I used this one: https://www.amazon.com/gp/product/B0794WSGN9/

Thanks, I'll order the same!
Except shutting down the monitor with the computer, it this allowing something else?

Quote from: Jehuty on May 23, 2024, 01:52:56 AMi am a little bit sceptical if that cable would solve my problem. It seems that in the cable is a active sync combiner like in the UMSA.
Yesterday i tried the XVI on an Grundig CRT TV and there are the colors right, with the same cables.
So, the CZ-600 works on Sony and Grundig while the XVI only works on the Grundig. Sadly i wanted to use the XVI with the Sony.

From what you tell me, I think it's your Sony TV, which now doesn't work as well as it should.

i am a little bit sceptical if that cable would solve my problem. It seems that in the cable is a active sync combiner like in the UMSA.
Yesterday i tried the XVI on an Grundig CRT TV and there are the colors right, with the same cables.
So, the CZ-600 works on Sony and Grundig while the XVI only works on the Grundig. Sadly i wanted to use the XVI with the Sony.

It's just a DIN-8 cable, you can buy them anywhere. I used this one: https://www.amazon.com/gp/product/B0794WSGN9/

Don't know why but updated to the last HDD image and my phantom drives problem went away the drive swap that i was adding to the autoexec was not necessary.