Quote from: HIggy on May 05, 2024, 06:05:09 AMI've not had an issue (done it 3x now) powering from PicoPSU (remember there are copies out there!!).
I use a 24 to 20 pin ATX short cable and then cut off the plug and just wire the wires to the correct side on the X68000.
On my Expert 2 I did use the SATA connector with an adaptor to plug into my internally mounted BlueSCSI V1.
Not noticed any LED or other issues.
Pretty sure e.g. 5v rails are all connected together. So does not matter which you use.
Quote from: HIggy on May 05, 2024, 05:51:16 AM@spectreman Hand-On loads and plays on Expert 2 with BlueSCSI V1As I thought, the problem arises from an incompatibility with the different Hitachi HD68HC000 10 MHz CPU for the first models, and the Motorola 68000 16 MHz CPU of the XVI and subsequent models.
Knight Arms also loads and plays