nfg.forums

NFG Forums => Info Requests => Topic started by: Area303 on September 21, 2016, 03:38:57 AM

Title: PC Engine Shuttle 2 Super CDROM2 mod , problem...
Post by: Area303 on September 21, 2016, 03:38:57 AM
Hello everyone

excuse me for my English, I'm French.
I plan to connect a pc engine  shuttle to  a super cdrom2 ( or Ifu30 ) , i mod the bachup ram .
I think i finished, but I still have a problem, cdrom does not react.
if I connect the shuttle to the super cdrom2 without card system, I have a white image, if I connect a CDR-30 and IFU30 card system with 3.0 but I picture when I press RUN, nothing past .
I have found the IRQ2 in the console that I connected to the port, I checked with an ohmmeter, wire by wire, everything is OK, I feel it lacks a wire coming out standby the cdrom.
could you help me find the problem ?

Thanks

photos :

(http://img15.hostingpics.net/pics/627541IMG20160919103934.jpg) (http://www.hostingpics.net/viewer.php?id=627541IMG20160919103934.jpg)

(http://img15.hostingpics.net/pics/921976IMG20160919101340.jpg) (http://www.hostingpics.net/viewer.php?id=921976IMG20160919101340.jpg)

(http://img15.hostingpics.net/pics/926304IMG20160920191047.jpg) (http://www.hostingpics.net/viewer.php?id=926304IMG20160920191047.jpg)

(http://img15.hostingpics.net/pics/973387IMG20160920191127.jpg) (http://www.hostingpics.net/viewer.php?id=973387IMG20160920191127.jpg)

(http://img15.hostingpics.net/pics/988650IMG20160920191154.jpg) (http://www.hostingpics.net/viewer.php?id=988650IMG20160920191154.jpg)